Clik here to view.
3D PRINTING – JOINT
The piece was made in the Makerbot 3D printer. The joint consists in a hard center with 12 arms made to be attached to brass triangles. Each arm has a 1 mm of diameter hole to lock the arm into the...
View ArticleClik here to view.
LASER CUT – FELT SPHERE
For experimenting with the material we chose 5 mm thickness felt. The sphere is composed by 8 triangular pieces of 2 types and together they create a simple anchor joint . By testing the joint we were...
View ArticleClik here to view.
MILLING – BRASS ORIGAMI
For experimenting with the material we used a 1.2 mm thickness sheet. Before starting the milling the brass sheet was attached to the machine’s board using double sided tape and 6 screws distributed...
View ArticleClik here to view.
MILLING-ZINC
During the milling process used a zinc thickness of 1 millimeter. The design is reflected in the creation of 2D file which bending procedure would assume 3d shape of a sphere, and as such is...
View ArticleClik here to view.
Clik here to view.
Group14 3D Printing sphere
Our material is MDF and PVC flexible, for the other 2 excises we used MDF only, so this time we wanted to do something different. We started from thinking what is the biggest difference between...
View ArticleClik here to view.
Clik here to view.
Clik here to view.
IC1 Digital Fabrication // FINAL PRESENTATIONS
Today the MAA01 students presented their final works for the Introductory Seminar in Digital Fabrication, led by Alexandre Dubor with Sofoklis Giannakpoulos and Anna Popova. The works consisted in...
View Article
